IMC Networks IE-MiniFiberLinX-II w/ TELCO Power Manual de instrucciones descargar pdf (Pagina 32)

The left side of the iView² screen will display the IMC Networks products on the

network. Click the connection for the IE-MiniFiberLinX-II to open its iView² screen.

The example shows a connection to a FiberLinX but this could vary depending on the

connection. When configuring the IE-MiniFiberLinX-II as a standalone unit, only the

IE-MiniFiberLinX-II will appear.

A navigation bar on the top of the screen displays the options for configuring the IE-

MiniFiberLinX-II connection.

These options include the following:

Host

Displays the configuration screen for the Host connection.

Remote

Displays the configuration screen for the Remote connection.

This will show the IE-MiniFiberLinX-II configuration information.

Information on this screen is provided on the following page.

NOTE

The Host and Remote buttons will not appear when configuring the IE-MiniFiberLinX-II

alone. In

this setup, a Configuration button will appear with the same settings.

Bandwidth

Displays the Bandwidth Limitation Settings.

Port Desc

Displays a screen for setting port descriptions. Each name should not

exceed 32 characters or include any spaces.

Tables

Displays a screen showing network performance statistics.

Advanced

Displays the IE-MiniFiberLinX-II advanced settings.

Agent Info

Displays information about the SNMP Management software.

Refresh

Reloads the content of a window with the most current data.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Sin comentarios

IMC Networks IE-MiniFiberLinX-II w/ TELCO Power Manual de instrucciones Pagina 32